WINCH SPECIFICATIONS
Some winch dimensions may vary slightly where improvements or modifications in manufacturing have taken place.
NOTE: For All Bolt-On Winches
To achieve full working load limit potential, fasteners must be equal or greater in strength than 7/16" NC Grade 8 bolts and bolts must be properly installed in all locations. Fasteners must also be attached to a structurally sound frame element capable of sustaining the maximum capacity of the winch assembly.| Part # | "A" Inches |
"B" Inches |
"C" Inches |
"D" Inches |
Weight (lbs.) |
| 7525 | 4 1/8 | 4 | 9 1/2 | 6 1/2 | 12.2 |
| 7527 | 5 | 4 | 10 | 6 3/8 | 11.3 |
| 7530 | 5 1/2 | 3 1/2 | 9 1/2 | 6 1/2 | 12.5 |
| 7530-U | 5 1/2 | 3 1/2 | 9 1/2 | 6 1/2 | 18.1 |
| 7540 | 5 1/2 | 3 1/2 | 7 7/8 | 4 7/8 | 8.6 |
| 7540-LH | 5 1/2 | 3 1/2 | 7 7/8 | 4 7/8 | 8.6 |
| 7540-NP | 5 1/2 | 3 1/2 | 7 7/8 | 4 7/8 | 8.0 |
| 7545-LH | 7 5/8 | 4 | 10 | 4 | 15.5 |
| 7545-RH | 7 5/8 | 4 | 10 | 4 | 15.3 |
| 7570 | 5 1/2 | 3 1/2 | 7 7/8 | 4 7/8 | 7.0 |
| * 7572 | 6 1/2 | 4 | 7 7/8 | 4 3/4 | 8.3 |
| * 7573 | 6 1/8 | 3 3/4 | 7 7/8 | 4 3/4 | 8.4 |
| * 7573-3B | 4 1/2 | 3 3/4 | 9 5/8 | 6 3/8 | 13.2 |
| * 7574 | 6 | 5 3/4 | 7 7/8 | 4 3/4 | 9.3 |
| * 7574-3B | 6 | 5 7/8 | 9 5/8 | 6 1/2 | 13.2 |
| * 7574A | 6 | 4 3/4 | 7 7/8 | 4 3/4 | 8.5 |
| * 7576 | 6 | 4 | 7 7/8 | 4 3/4 | 10.3 |
| 7585 | 5 1/2 | 4 | 7 7/8 | 4 3/4 | 9.3 |
| 7590 | 7 | 4 | 7 7/8 | 4 3/4 | 10.5 |
| 7590-TR | 5 5/8 | 3 1/2 | 8 | 4 7/8 | 8.4 |
| 7590S | 7 1/2 | 4 | 7 7/8 | 4 3/4 | 10.9 |
| 8425 | 4 | 4 | 7 7/8 | 4 7/8 | 7.8 |
| 8425-LH | 4 | 4 | 7 7/8 | 4 7/8 | 7.8 |
| 8425-NP | 4 | 4 | 7 7/8 | 4 7/8 | 7.8 |
| 8425C | 4 | 4 | 9 3/4 | 6 1/2 | 9.5 |
| 8425-CM | 4 | 4 1/2 | 9 | 4 7/8 | 10.6 |
| 8427 | 3 7/8 | 4 7/8 | 8 1/8 | 4 3/4 | 7.0 |
| 8427-CM | 4 5/8 | 4 7/8 | 8 1/8 | 4 3/4 | 8.0 |
| 8427C | 3 7/8 | 4 7/8 | 10 | 6 1/2 | 8.2 |
| 8430 | 5 1/2 | 3 1/2 | 7 7/8 | 4 7/8 | 8.2 |
| 8430-DC | 5 1/2 | 3 1/2 | 9 5/8 | 4 7/8 | 9.0 |
| 8430-U | 5 1/2 | 3 1/2 | 7 7/8 | 4 7/8 | 12.3 |
| 8430C | 5 1/2 | 3 1/2 | 9 3/4 | 6 1/2 | 10.0 |
| 8430F | 5 1/2 | 3 1/2 | 7 7/8 | 4 7/8 | 11.6 |
| 8430S | 7 | 4 | 7 7/8 | 4 3/4 | 10.0 |
| 8435 | 4 | 4 | 7 7/8 | 4 7/8 | 7.8 |
| 9525 | 4 | 4 | 7 7/8 | 4 7/8 | 8.1 |
| 9525-2S | 4 | 4 | 7 7/8 | 4 7/8 | 8.6 |
| 9525C | 4 1/4 | 4 | 9 3/4 | 6 1/2 | 10.0 |
| 9525C-2S | 4 1/4 | 4 | 9 3/4 | 6 1/2 | 10.5 |
| 9530 | 5 1/2 | 3 1/2 | 7 7/8 | 4 7/8 | 9.0 |
| 9530-2S | 5 1/2 | 3 1/2 | 7 7/8 | 4 7/8 | 9.5 |
| 9530-M | 5 1/2 | 3 1/2 | 7 7/8 | 4 7/8 | 9.0 |
| 9530C | 5 1/2 | 3 1/2 | 9 3/4 | 6 1/2 | 10.4 |
| 9530C-2S | 5 1/2 | 3 1/2 | 9 3/4 | 6 1/2 | 10.8 |